There is a abundance of industrial facilities located in the Huntsville, Alabama Metro Area. Keeping those facility industrial floors in top condition is critical to business operations. Downtimes for replacement and repair are costly to business. Floor damages lessen the appeal of industrial spaces, making them a poor work environment for employees.
1. Choose quality over cost. Quality products may cost more, but they guarantee good performance. 2. Surface preparation is critical. Repair any damages, clean and degrease the surfaces carefully. Improper preparation can cause the rest of the application process and the finished floors to fail. 3. Call on the professionals. Experts have the skills, experience and resources to deliver quick and error-free applications. Why Epoxy Coatings?
Industrial epoxy floor coating products stand above the rest in delivering the highest quality and best performance in industrial floor applications. They are highly-resistant to oil, chemicals, water, and physical impact from mechanical loads and pedestrian traffic. These elements assault industrial floors frequently in the course of daily operations.
Industrial epoxy floor coating products are also good materials for floor beautification. There are many epoxy products with a wide range of color choices to choose from. Epoxy works well as concrete finishes, or top coats that enhance the look of industrial floor finishes.
There are cases when industrial epoxy floor coating applications encounter challenges that threaten the process of bringing back the beauty and good condition of industrial floors. Here are some of them:
1. Formation of air bubbles and pinholes. Thick epoxy coats can form round bubbles from trapped air. This can come from either an improper mixing speed, or from cement out-gassing, or the improper use of foam rollers during application. 2. Uneven coloration. Unsightly differences in coating color come from mixing small batches of industrial epoxy floor coating products, or working in sun-exposed environments. 3. Fisheyes. Fisheyes are tiny craters erupting in the coated surface, and are due to the presence of grease and dust particles coming in contact with the coatings.
Causes of Adhesion Failure
The main reason for a total coatings failure is often an underlying adhesion failure. Below are the reasons why good adhesion is not achieved:
1. Ultra-violet radiations. Exposure to the sun's rays can break down the adhesive properties of epoxy coatings, turning it brittle and prone to cracking. 2. High humidity. Industrial epoxy floor coating products change their properties when exposed to humid surroundings. Product preparation, mixing and application are compromised. 3. Moisture. Damp surfaces, particularly concrete, are vulnerable to adhesion failure. When flowing water is present during application, it erodes the adhesive bond between surface and coating. 4. Foreign contaminants. Dust, dirt, grease and oil lessen surface adhesion. Oils, in particular, causes hollows and voids within the coating, causing failure in the course of time.
Industrial epoxy floor coating products are often the top choice for floor maintenance and repair. They are tough, enduring, and comes in many colors. With good surface preparation, industrial epoxy floor coating applications have a high chance of success. Success offers the benefits of industrial floors that are long-lasting, stylish and practical at the same time.
Lifetime Epoxy Floors - 200 Elizabeth Street - Boaz, AL 35957 Mailing Address: Lifetime Epoxy Floors, PO Boaz 848 Boaz AL. 35957 Toll Free: 1-800-214-4311 Email: LifetimeEpoxy(at)USA.com Contacts: Trey Dixon - General Manager Cell - 1-256-558-7006 Nick Dixon - Owner - 1-256-683-1955 Lifetime Epoxy Established 2011 - A division of Garage Shapeups. LLC. located at 200 Elizabeth Street, Boaz, AL 35957